Band Sensor

Sensor Type


Thermocouple : J, K, T or N          Pt100 : 2, 3 or 4 wire


Thermistor : 2 wire                      Pt1000 : 2, 3 or 4 wire

Junction Types

 Grounded or insulated

 Sheath Material

stainless steel 6mm or 10mm wide (cut to size)

stainless steel hose clip (standard size)

316 grade stainless steel (support tube if applicable)

Cable Types

            PVC Flat pair (-10 to +150C)       PFA Twisted pair (-50 to +250C)

            PFA Flat pair (-50 to +250C)           Fibreglass Flat Pair (-50 to +350C)

            F/glass + st/st overbraid (-50 to +350C)

         Note : flat pair only applicable for 2 wire sensors

Termination types

            Stripped tails       Tails with crimp terminals

        Miniature 2 pin plug (or socket)      Standard 2 pin plug (or socket)

3 pin version of the above connectors can be fitted for Pt100 & Pt1000 sensors

Note : Custom connectors can also be fitted


  The standard glass filled plastic connector is rated to 200-220C

 A higher rated glass filled plastic is available, rated to 350C

            A ceramic connector can also be fitted. This is rated to 500C but please note these connectors

are fragile due to their material.