Tip Bayonet Sensor

Sensor Type


Thermocouple : J, K, T or N          Pt100 : 2, 3 or 4 wire


Thermistor : 2 wire                      Pt1000 : 2, 3 or 4 wire

Junction Types

Grounded or insulated

Sheath Material

3/16 or 6mm short brass tip

stainless steel for all other diameters and lengths

Bayonet Cap Types

10mm or 12mm 2 pin cap

10mm ID 1 and 2 slot

11.5mm ID 1 and 2 slot

other 2 slot sizes

12.5mm, 13mm, 14mm, 15mm, 16mm & 17mm

Cable Types

            PVC Flat pair (-10 to +150C)       PFA Twisted pair (-50 to +250C)

            PFA Flat pair (-50 to +250C)           Fibreglass Flat Pair (-50 to +350C)

F/glass + st/st overbraid (-50 to +350C)

Armour over any of the above versions

Note : flat pair only applicable for 2 wire sensors

Termination types

Stripped tails       Tails with crimp terminals

        Miniature 2 pin plug (or socket)      Standard 2 pin plug (or socket)

3 pin version of the above connectors can be fitted for Pt100 & Pt1000 sensors

Note : Custom connectors can also be fitted


  The standard glass filled plastic connector is rated to 200-220C

 A higher rated glass filled plastic is available, rated to 350C

            A ceramic connector can also be fitted. This is rated to 500C but please note these connectors

are fragile due to their material.